Zu Inhalt springen
Kostenloser Versand ab einem Bestellwert von 50 £
Kostenloser Versand ab einem Bestellwert von 50 £
Can you fit an instant hot tap in your kitchen?

Can you fit an instant hot tap in your kitchen?

We’d love to say YES! But the truth is that you’re going to need to check off a few things first.

(Don’t worry – buying a brand new sink isn’t one of them!)

1 – Check your water pressure

Most water systems are suitable for installing an instant tap. But a quick check will help you to be certain.

Water pressure is a measure of how fast water runs through your taps, and you’ll need water pressure of at least 1 bar to install an instant tap.

 1 bar means that water flows out of the tap at 10 litres per minute. It’s easy to do a quick test!

1          To test properly, make sure you don’t have water running anywhere else in the home or garden. (We all know what happens when someone flushes while you’re showering.)

2          Fetch a 1 or 2 litre jug and place it under your tap.  It should have measurements on it – if the numbers are small, add a bit of tape to mark the 1 litre line!

3          It’s helpful to ask another person to time the water while you switch on the tap. Using a stopwatch (or your phone), time the number of seconds it takes to dispense 1 litre.

4          1 bar means 10 litres per minute, which is 1 litre in 6 seconds. If your timing is longer, you have low water pressure. But if you get 1 litre in 6 seconds or less, your pressure is OK.

2 - Check your available space

You’ll be pleased to hear that this test is simpler.  

All you need is a tape measure and notepad! Check the dimensions of your chosen tank(s).  Our standard tank measures 210mm x 210mm x 327mm. They’re designed to fit into regular (600mm) kitchen cupboards.

3 – Get an installation quote

You don’t have to install a whole new kitchen to add an instant tap to your setup! 

Nope… you can retro-fit an instant tap under the sink in your kitchen. Installation takes about half a day and should cause very little disruption – you might just need to rehome the Fairy Liquid.

Our installation service is currently available in West Midlands, Staffordshire, Leicestershire, Warwickshire, Worcestershire, Herefordshire, Shropshire, Derbyshire, Nottinghamshire, Lincolnshire, Cambridgeshire, Northamptonshire, Bedfordshire, Buckinghamshire, Oxfordshire, Cheshire, and Greater Manchester.

If you live in another county, request a quote from a qualified plumber. Once you get a date, the whole process will probably be easier than you expect!

Read next: Do you really need an instant tap?!

Well, obviously we’re biased. But if you need validation, read about all the ways you’ll use your instant tap. Most people find that once they have one, they’d never be without it!

Vorheriger Artikel Do you really need an instant tap?
Nächster Artikel Do you need an instant tap that reaches 100 degrees?

Einen Kommentar hinterlassen

* Erforderliche Felder

Produkte vergleichen

{"one"=>"Wählen Sie 2 oder 3 Artikel zum Vergleichen aus", "other"=>"{{ count }} von 3 Elementen ausgewählt"}

Wählen Sie das erste zu vergleichende Element aus

Wählen Sie das zweite zu vergleichende Element aus

Wählen Sie das dritte Element zum Vergleichen aus

Vergleichen